Apical papilla stem cell-derived exosomes regulate lipid metabolism and alleviate inflammation in the MCD-induced mouse NASH model.

Stem cells from the apical papilla(SCAPs) exhibit remarkable tissue repair capabilities, demonstrate anti-inflammatory and pro-angiogenic effects, positioning them as promising assets in the realm of regenerative medicine. Recently, the focus has shifted towards exosomes derived from stem cells, perceived as safer alternatives while retaining comparable physiological functions. This study delves into the therapeutic implications of exosomes derived from SCAPs in the methionine-choline-deficient (MCD) diet-induced mice non-alcoholic steatohepatitis (NASH) model. We extracted exosomes from SCAPs. During the last two weeks of the MCD diet, mice were intravenously administered SCAPs-derived exosomes at two distinct concentrations (50 µg/mouse and 100 µg/mouse) biweekly. Thorough examinations of physiological and biochemical indicators were performed to meticulously evaluate the impact of exosomes derived from SCAPs on the advancement of NASH in mice induced by MCD diet. This findings revealed significant reductions in body weight loss and liver damage induced by the MCD diet following exosomes treatment. Moreover, hepatic fat accumulation was notably alleviated. Mechanistically, the treatment with exosomes led to an upregulation of phosphorylated adenosine monophosphate-activated protein kinase (p-AMPK) levels in the liver, enhancing hepatic fatty acid oxidation and transporter gene expression while inhibiting genes associated with fatty acid synthesis. Additionally, exosomes treatment increased the transcription levels of key liver mitochondrial marker proteins and the essential mitochondrial biogenesis factor. Furthermore, the levels of serum inflammatory factors and hepatic tissue inflammatory factor mRNA expression were significantly reduced, likely due to the anti-inflammatory phenotype induced by exosomes in macrophages. The above conclusion suggests that SCAPs-exosomes can improve NASH.

High-level production of cordycepin by the xylose-utilising Cordyceps militaris strain 147 in an optimised medium.

Cordycepin is an important active metabolite of Cordyceps militaris. Xylose, an attractive feedstock for producing chemicals through microbial fermentation, cannot be effectively utilised by many reported C. militaris strains. Herein, a xylose-utilising C. militaris strain 147 produced the highest level of cordycepin (3.03 g/L) in xylose culture. Xylose, alanine, and ammonium citrate were determined as the main affecting factors on the cordycepin production using a Plackett-Burman design. The combination of these factors was optimised using response surface methodology, and the maximal 6.54 g/L of cordycepin was produced by the fungus in the optimal medium. Transcriptome analysis revealed that xylose utilisation upregulated the transcriptional levels of genes participating in purine and energy metabolisms in the fungus, which may facilitate the formation of precursors for cordycepin biosynthesis. This investigation provides new insights into the efficient production of cordycepin and is conducive to the valorisation of biomass rich in xylose.

Low-temperature molten salt synthesis and catalytic mechanism of CoS2/NC as an advanced bifunctional electrocatalyst.

The development of productive and sustainable bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) plays an important role in the commercial evolution of metal-air batteries. In this paper, a low-temperature molten salt template method was adopted to synthesize the composite of CoS2 and nitrogen-doped carbon (CoS2/NC) without the protection of inert gas. The structural characterization studies show that the specific surface area (SSA) and crystal growth kinetics are increased and effectively improved, respectively, by the composite of CoS2 and NC. The as-synthesized CoS2/NC composite demonstrates outstanding bifunctional catalytic activity in alkaline electrolytes and exhibits a half-wave potential (E1/2) of 0.854 V (vs. RHE) and an overpotential of only 220 mV for the OER at a current density of 10 mA cm-2 (η10). Simultaneously, CoS2/NC also exhibits excellent electrochemical stability. Additionally, density functional theory (DFT) calculations have manifested that the synergistic effect of CoS2 and NC results in a remarkable enhancement in the bifunctional catalytic performance of the composite materials. This study offers a new pathway and theoretical guidance for the fabrication of efficient bifunctional electrocatalysts.

Design, synthesis, and biological evaluation of dinuclear bismuth(III) complexes with Isoniazid-derived Schiff bases.

Four dinuclear bismuth(III) Schiff-base complexes bearing Schiff-base ligands have been synthesized and structurally characterized by single-crystal X-ray diffraction, elemental analysis, and spectral techniques (FT-IR, NMR and MS). The analytical data reveal the bismuth(III) complexes possess 1:1 metal-ligand ratios. In vitro biological studies have revealed that bismuth(III) complexes displayed much higher antibacterial and antitumor activities than their parent ligands, which involves two gram-negative (S. aureus, B. subtili) and two gram-positive (E. coli, P. aeruginosa) bacteria, and human gastric cancer SNU-16 cells. The power-time curves of S. pombe exposed to tested compounds were detected by bio-microcalorimetry. Some thermokinetic parameters (k, Pmax,tG and Qtotal) were derived based on the metabolic power-time curves, and their quantitative relationships with the concentrations (c) were further discussed.

Construction of Electrochemical and Photoelectrochemical Sensing Platform Based on Porphyrinic Metal-Organic Frameworks for Determination of Ascorbic Acid.

Highly sensitive and specific detection of biomolecular markers is of great importance to the diagnosis and treatment of related diseases. Herein, Cu-TCPP@MOFs thin films were synthesized with tetrakis(4-carboxyphenyl) porphyrin (H2TCPP) as organic ligands and copper ions as metal nodes. The as-synthesized Cu-TCPP@MOFs thin films as electrode modifiers were used to modify the pre-treated glassy carbon electrode (GCE) and the electrochemical performances of Cu-TCPP@MOFs/GCE were evaluated by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). Furthermore, as the working electrode, the constructed Cu-TCPP@MOFs/GCE was used for the investigation of ascorbic acid (AA) due to its outstanding electrocatalytic activities towards AA by several electrochemical methods, including cyclic voltammetry (CV), differential pulse voltammetry (DPV), and chronoamperometry (CA). The well-linear relationship was established based on different AA concentration ranges and the ideal detection limits (LOD) were obtained in the above-mentioned electrochemical methods, respectively. Furthermore, a Cu-TCPP MOFs@GCE sensing platform was used as a photoelectrochemical (PEC) sensor to quantitatively detect AA based on the strong absorption properties of Cu-TCPP ingredients in Cu-TCPP MOFs in a visible light band of 400~700 nm. PEC sensing platform based on Cu-TCPP@MOFs exhibited a more extensive linear concentration range, more ideal detection limit, and better sensitivity relative than the other electrochemical methods for AA. The well linear regression equations were established between the peak current intensity and AA concentrations in different electrochemical technologies, including CV, DPV, and CA, and PEC technology. AA concentration ranges applicable to various electrochemical equations were as follows: 0.45~2.10 mM of CV, 0.75~2.025 mM of DPV, 0.3~2.4 mM of CA, 7.5~480 µM of PEC, and the corresponding detection limits for AA were 1.08 µM (S/N = 3), 0.14 µM (S/N = 3), 0.049 µM (S/N = 3), and 0.084 nA/µM. Moreover, the proposed Cu-TCPP MOFs@GCE electrochemical and photoelectrochemical sensing platform was applied to determine the AA concentration of a real human serum sample; the results reveal that Cu-TCPP MOFs@GCE sensing platform could accurately determine the concentration of AA of the human serum under other potential interferences contained in the human serum samples.

Genomic Sequence and Transcriptome Analysis of the Medicinal Fungus Keithomyces neogunnii.

The filamentous fungus Keithomyces neogunnii can infect the larvae of Lepidoptera (Hepialus sp.) and form an insect-fungi complex, which is utilized as an important traditional Chinese medicine. As a valuable medicinal fungus, K. neogunnii produces diverse bioactive substances (e.g., polysaccharide, vitamins, cordycepic acid, and adenosine) under cultivation conditions. Herein, we report the first high-quality genome of the K. neogunnii single-spore isolate Cg7.2a using single-molecule real-time sequencing technology in combination with Illumina sequencing. The assembled genome was 32.6 Mb in size, containing 8,641 predicted genes and having a GC content of 52.16%. RNA sequencing analysis revealed the maximum number of differentially expressed genes in the fungus during the stroma formation stage compared with those during the mycelium stage. These data are valuable to enhance our understanding of the biology, development, evolution, and physiological metabolism of K. neogunnii.

Kgp DNA Vaccine Prevents Experimental Periodontitis.

PURPOSE: To investigate the prophylactic effect of lysine-specific protease (Kgp) vaccine on experimental periodontitis in mice. MATERIALS AND METHODS: We constructed the eukaryotic expression plasmid pVAX1-kgp and immunised mice with the recombinant plasmid. Mice were divided into two groups and immunised with pVAX1-kgp or pVAX1 three times at 2-week intervals. Immunoglobulin (Ig)G, IgG1 and IgG2a antibodies were detected by enzyme-linked immunosorbent assay (ELISA) before and after immunisation. At the last immunisation, a silk ligature infiltrated with Porphyromonas gingivalis (P. gingivalis) was tied at the neck of the maxillary second molar to induce experimental periodontitis. Each group was euthanised after 10 days, and microcomputed tomography (micro-CT) and hematoxylin-eosin (HE) staining were used to detect the loss of alveolar bone. RESULTS: Comparison with the pVAX1 group indicated that mice immunised with Kgp had higher levels of IgG (P < 0.05); the levels of the IgG1 were statistically significantly different (p < 0.05), and the levels of the IgG2a subtype were not significantly different. The results of micro-CT and HE staining showed that the alveolar bone loss in the pVAX1-kgp group was statistically significantly less than that in the pVAX1 group (p < 0.05). The expression of the related inflammatory factors, including interleukin-1ß (IL-ß), tumour necrosis factor (TNF-α) and interleukin-6 (IL-6), was lower in the pVAX1-kgp group than in the pVAX1 group. CONCLUSION: The Kgp DNA vaccine can enhance IgG levels in a model of experimental periodontitis, effectively activate immunity, and mitigate alveolar bone loss.

Drought monitoring in arid and semi-arid region based on multi-satellite datasets in northwest, China.

Drought is a complex natural disaster affected by multiple climate factors and underlying surface. In recent years, drought monitoring indices of remote sensing have been widely applied to monitor drought in a certain region or global. However, some remote sensing drought monitoring indices do not consider the drought-causing factors enough to reflect the comprehensive drought situation of a region fully. In this paper, a new remote sensing drought monitoring index, called Remote Sensing Drought Evaluation Index (RSDEI), was constructed by combining Vegetation Condition Index (VCI), Temperature Condition Index (TCI), Precipitation Condition Index (PCI), and Soil Moisture Condition Index (SMCI) using the spatial principal component analysis (SPCA) method. The reasonableness of RSDEI was test and verified using Net Primary Productivity (NPP), Standardized Precipitation Evapotranspiration Index (SPEI), and unit area crop yield. The RSDEI was also applied to the drought condition monitoring of the northwest arid and semi-arid region from 2001 to 2019.The result demonstrated that the results showed that the RSDEI had a high correlation coefficient with SPEI-12 (R=0.85, p<0.01). It is concluded that the correlation coefficient between RSDEI and NPP is 0.74 at 95% confidence level, which indicates that RSDEI and NPP have a strong correlation. Then, the correlation between RSDEI and crop yield per unit area is 0.89. The results of RSDEI showed that the drought in northwest China started in May and lasted in September from 2001 to 2019. The lowest value of RSDEI appeared in May, which inflected the significant difference of drought level in different month in northwest China. The result of CV (coefficient of variation) showed that the drought variation in the study area had a stable low fluctuation condition as a whole, in the northwest and northeast of study area, which indicated that the changes of drought were different in the past 19 years. The Hurst exponent analysis showed that the area with the positive evolution of Hurst index (0.5

Monitoring drought dynamics in China using Optimized Meteorological Drought Index (OMDI) based on remote sensing data sets.

Timely and accurate monitoring of the spatiotemporal changes in drought is very important for the reduction in the social losses caused by drought. The Optimized Meteorological Drought Index (OMDI), originally established in southwestern China, showed great potential for drought monitoring over large regions on a large scale. However, the applicability of the index requires further evaluation, especially when used throughout China, which has a different agricultural divisions, variable climatic conditions, complex terrain and diverse land cover. In addition, the OMDI model relies on training data to construct local parameters for the model. On a large scale, it is of great significance to use multisource remote sensing data sets to construct OMDI model parameters. In this paper, the constrained optimization method was used to establish weights for the MODIS-derived Vegetation Conditional Index (VCI), TRMM-derived Precipitation Condition Index (PCI), and GLDAS-derived Soil Moisture Condition Index (SMCI) and calculate the OMDI based on the Standard Precipitation Index (SPI), Standardized Precipitation Evapotranspiration Index (SPEI) and weather stations. The accuracy of the OMDI model was evaluated by using the correlation coefficient. Moreover, the spatiotemporal changes in drought were also analyzed through trend analysis, Mann-Kendall (MK) statistics and the Hurst index on the monthly and annual scales. The results showed that (1) the highest positive correlation between the OMDI and the SPI was SPI-1, which was higher than that for any other month interval, such as 3 months, 6 months, 9 months and 12 months of the SPI. The results indicated that the OMDI was suitable to monitor meteorological drought. (2) In the nine agricultural subareas in China, the degree of drought in the Yangtze River (DYR) area had the most severe evolution and change frequency. This region was very sensitive to drought in the past two decades. (3) The area with OMDI variation coefficient less than 0.1 accounted for 94%, indicating that the degree of drought fluctuates little; The linear tendency rate is 0.0004, and the area greater than 0 reaches 66.44%, indicating that the drought is developing in a lightning trend. (4) The Hurst index value is mostly higher than 0.5 (the area ratio is 56.31%), and the area of "Positive-Consistent" and "Negative- Opposite" accounted for 54.02%, indicating that more than half of China's area drought changes will show a trend of mitigation in the future.

Recent Advances on the Applications of Luminescent Pb2+-Containing Metal-Organic Frameworks in White-Light Emission and Sensing.

Luminescent Pb2+-based metal-organic frameworks (MOFs) belong to a new class of multifunctional molecular materials with interesting luminescence properties and potential applications within a single crystalline phase. In this mini review, we present the recent advances that have been achieved in their applications as single-phase white-light emitting materials and chemosensors in the last decade. We focus on the trends in the modification of their structures and luminescence by various bridging ligands, and subsequently their multifunctional applications, which may affect the future development of the field.

Lactone radical transformed methyl mercaptan-adsorbed activated carbon into graphene oxide modified activated carbon.

Activated carbon was a widely-used adsorbent. However, it was usually classified as a hazardous waste after saturation adsorption for one pollution. For the first time, this article reported a regeneration method for the activated carbon saturated with methyl mercaptan. The regenerated carbon was partially transformed into graphene-oxide fragment with a thickness of 0.9-1.0 nm after a hydrothermal treatment at 180 °C. Electron paramagnetic resonance revealed that lactone group was transformed into lactone radical under the hydrothermal condition. The spins were increased from 4.54E+17-1.24E+18. The formed radical effectively reacted with the adsorbed methyl mercaptan and re-distributed the amorphous activated carbon to form lamellar graphene oxide. As a result, the spins were decreased from 1.24E+18-8.73E+17. At the same time, the amount of lactone group was decreased from 0.71 to 0.42 mmol/g. The regenerated activated carbon thus regained ability to adsorb methyl mercaptan. The main result of this paper puts forward a simple and low-cost method to obtain graphene oxide modified activated carbon from the regeneration of hazardous waste carbon. This conclusion makes contribution to the development of "zero-waste" conception.

Reducing human activity promotes environmental restoration in arid and semi-arid regions: A case study in Northwest China.

Human activities have adversely impacted grassland net primary productivity (NPP) across the world, and quantitative estimations of the anthropogenic impacts on NPP (HNPP) can be helpful to improve environmental protection and climate adaptation measures. However, disentangling the effects of climate variability and human activities on NPP is problematic and requires the calculation of potential net primary productivity (PNPP). In this study, we assessed the anthropogenic impacts on NPP in the Shiyang River basin-a typical arid and semi-arid region. We used the seasonal changes in NPP to identify the grids that were not affected by human activity and then proposed a method to calculate PNPP based on the leaf area index (LAI). We estimated the actual net primary productivity (ANPP) using the Carnegie-Ames-Stanford Approach (CASA) model, and the HNPP was then calculated as the difference between ANPP and PNPP. Our results showed that this method for PNPP calculation was reliable. From 2001 to 2016, the positive (90.85 gC·m-2·a-1) and negative effects (-130.21 gC·m-2·a-1) of human activities on NPP accounted for 32.68% and 46.84% of the ANPP, respectively, and the overall average HNPP was -39.36 g C·m2·a-1. The implementation of ecological and environmental protection projects gradually mitigated the negative effects of human activity on NPP at a rate of 4.55 gC·m-2·a-1; however, negative HNPP values still occupied 55.39% of the entire region in 2016. In contrast with the prevailing views that climate change is the main factor accounting for vegetation recovery in arid and semi-arid regions, our results suggest that reducing human activities can significantly promote environmental restoration. The findings of this study suggest that policy makers and stakeholders can restore grassland ecosystems and promote environmental protection by reducing anthropogenic activities in arid and semi-arid regions.

Comparative evaluation of drought indices for monitoring drought based on remote sensing data.

Many indices are used to monitor drought events. However, different indices have different data requirements and applications. Hence, evaluating their applicability will help to characterize drought events and refine the development of effective drought indices. We constructed different drought indices based on multisource remote sensing data and comprehensively evaluated and compared their applicability for drought monitoring throughout China. The characteristics of drought events in 2009 and 2011 were compared using various drought indices. The different time scales of the Palmer Drought Severity Index (PDSI) and the Standardized Precipitation Index (SPI) were used to evaluate remote sensing drought indices in different regions. Single drought indices, including the Vegetation Condition Index (VCI), the Temperature Condition Index (TCI) derived from Moderate Resolution Imaging Spectroradiometer (MODIS) data, the Precipitation Condition Index (PCI) derived from Tropical Rainfall Measurement Mission (TRMM) data, and the TCI and Soil Moisture Condition Index (SMCI) derived from Advanced Microwave Scanning Radiometer for the Earth Observing System (AMSR-E) data, as well as combined drought indices, including the Microwave Integrated Drought Index (MIDI), Optimized Vegetation Drought Index (OVDI), Optimized Meteorological Drought Index (OMDI), Scale Drought Conditions Index (SDCI), and Synthesized Drought Index (SDI), were analyzed and compared to evaluate their applicability. The results showed that different drought indices have specific characteristics under different land use types in China. The VCI and TCI can better monitor long-term drought conditions, but they have a weak correlation with the in situ drought index in forestland and grassland areas. The correlation of SPI-1 with the PCI is higher than that with other single indices, which indicates that the PCI is a good short-term drought index. The SMCI has a better correlation with the short-term in situ drought index, but it is not conducive to drought monitoring in areas such as densely forested land and grassland. The correlations of the in situ drought index with the combined drought indices (the MIDI, OVDI, OMDI, SDCI, and SDI) are better than those with the single drought indices.

Fixation stability of glass matrix co-existent with crystal phases for heavy metals formed by high-temperature vitrification.

Vitrification is an effective solidification method for heavy metal-containing wastes. However, most investigations focused on the formation of glass matrix. Seldom report discussed the influence of co-existing crystals on heavy metal stabilizations. In this work, Ca-Al-Si phase was formed in the glass matrix by adjusting the composition of feeding ingredient and melting temperature. As a result, when molar ratio of CaO/(SiO2+Al2O3) was lower than 0.97 and reaction temperature was bigger than 1300 °C, small-size Ca-Al-Si phase (Ca2Al2SiO7 and CaAl2Si2O8) was homogeneously distributed in vitreous matrix. At the same time, Cr, Zn, and Pb leaching concentrations were the lowest, far lower than the leaching standard values. According to theoretical calculations, Zn and Pb replaced Ca atom; Cr replaced Al atom in Ca-Al-Si phase under thermal conditions. These replacements resulted in the fixation and stabilization of heavy metals. When the CaO/(SiO2+Al2O3) molar ratio was bigger than 1.00, neither glass nor Ca-Al-Si was formed. Similarly, when the melting temperature was decreased, Ca-Al-Si phase formed a bigger size. Both these went against the stabilization, resulting in high leaching concentrations of heavy metals. The main of this work will help the development of high-temperature melting for the treatment of hazardous wastes.

Differential proteomics study of postharvest Volvariella volvacea during storage at 4 °C.

The postharvest storage of Volvariella volvacea is an important factor limiting the industry development. Low-temperature storage is the traditional storage method used for most edible fungi, but V. volvacea undergoes autolysis at low temperature. To understand the molecular mechanism underlying the low-temperature autolysis of V. volvacea after harvesting, fruiting bodies of V. volvacea strain V23 were stored at 4 °C. Based on our previous study, in which the changes of morphological and physiological indexes during storage for 0, 6, 12, 24, 30, 36, 48 and 60 h were measured; four time points, namely, 0, 12, 24 and 60 h, were selected for this differential proteomics study. The proteomic changes in the postharvest storage samples were studied by isobaric tags for relative and absolute quantification-coupled two-dimensional liquid chromatography-tandem mass spectrometry (2D LC-MS/MS). A total of 2,063 proteins were identified, and 192 differentially expressed proteins (DEPs), including 24 up-regulated proteins and 168 down-regulated proteins, were detected after 12 h of storage. After 24 h of storage, 234 DEPs, including 48 up-regulated and 186 down-regulated proteins, were observed, and after 60 h, 415 DEPs, including 65 up-regulated proteins and 350 down-regulated proteins, were observed. An in-depth data analysis showed that the DEPs participated in various cellular processes, particularly metabolic processes. In this study, we combined Gene Ontology and Kyoto Encyclopedia of Genes and Genomes pathway analyses, and the results focused on oxidative phosphorylation and ubiquitin mediated proteolysis pathways. In addition, sdh2, uba1 and ubc1 was confirmed by quantitative real-time polymerase chain reaction, and the results showed that the expression of these genes were consistent with their protein level. Based on the literature and our results, it is speculated that the identified DEPs, such as ATP1, SDH2, COR1, UBA1, COX4, UBC1 and SKP1 play a key role in the low-temperature autolysis of V. volvacea.

The biocompatibility and mechanical properties of plasma sprayed zirconia coated abutment.

PURPOSE: The aim of this study was to evaluate the clinical performance and reliability of plasma sprayed nanostructured zirconia (NSZ) coating. MATERIALS AND METHODS: This study consisted of three areas of analysis: (1) Mechanical property: surface roughness of NSZ coating and bond strength between NSZ coating and titanium specimens were measured, and the microstructure of bonding interface was also observed by scanning election microscope (SEM). (2) Biocompatibility: hemolysis tests, cell proliferation tests, and rat subcutaneous implant test were conducted to evaluate the biocompatibility of NSZ coating. (3) Mechanical compatibility: fracture and artificial aging tests were performed to measure the mechanical compatibility of NSZ-coated titanium abutments. RESULTS: In the mechanical study, 400 µm thick NSZ coatings had the highest bond strength (71.22 ± 1.02 MPa), and a compact transition layer could be observed. In addition, NSZ coating showed excellent biocompatibility in both hemolysis tests and cell proliferation tests. In subcutaneous implant test, NSZ-coated plates showed similar inflammation elimination and fibrous tissue formation processes with that of titanium specimens. Regarding fatigue tests, all NSZ-coated abutments survived in the five-year fatigue test and showed sufficient fracture strength (407.65-663.7 N) for incisor teeth. CONCLUSION: In this study, the plasma-sprayed NSZ-coated titanium abutments presented sufficient fracture strength and biocompatibility, and it was demonstrated that plasma spray was a reliable method to prepare high-quality zirconia coating.

Transcriptome sequencing analysis of the MSDIN gene family encoding cyclic peptides in lethal Amanita fuligineoides.

Amanita fuligineoides, a lethal mushroom discovered in China, contains abundant cyclic peptide toxins that can cause fatal poisoning. However, the MSDIN gene family encoding for these cyclic peptides in A. fuligineoides has not been systematically studied. In this research, the transcriptome sequencing of A. fuligineoides was performed and its MSDIN family members were analyzed. A total of 4.41 Gb data containing 30833 unigenes was obtained; sequence alignments throughout several databases were done to obtain their functional annotations. Based on these annotations, MSDIN genes were found and verified by RT-PCR. A total of 29 different core peptides were obtained: 3 toxin genes, encoding ß-amanitin (ß-AMA), phalloidin (PHD), and phallacidin (PCD), and 26 genes encoding unknown cyclic peptides, 20 of which are reported for the first time and may encode for novel cyclic peptides. Analysis of the predicted precursor peptides indicated that octocyclic peptides were the main MSDIN peptides synthesized by A. fuligineoides, accounting for the 45%. A phylogenetic analysis suggested that studied precursor peptides could be clustered into 7 clades, which might represent different functionalities. Results suggested that A. fuligineoides might have a strong capacity to synthesize cyclopeptides, laying the foundation for their excavation and utilization.

Dataset of the net primary production on the Qinghai-Tibetan Plateau using a soil water content improved Biome-BGC model.

The Biome-BGC (biome biogeochemical cycles) model is widely used for modeling the net primary productivity (NPP) of ecosystems. However, this model ignores soil water changes during the freeze-thaw process in permafrost regions, which may lead to considerable errors in the NPP estimations. In this context we propose a numerical simulation method for improving soil water content during the freeze-thaw process based on the field observation data of soil water and temperature. This approach does not require new parameters and has no impact on other modules. The improvement of soil water content during the freeze-thaw process was then incorporated in the Biome-BGC model for NPP in an alpine meadow in the central Qinghai-Tibetan Plateau (QTP). Interpretation of this data can be found in a research article entitled "An approach for improving soil water content for modeling net primary production on the Qinghai-Tibetan Plateau using Biome-BGC model" (Li et al., 2019).

The osteoinduction of RGD and Mg ion functionalized bioactive zirconia coating.

The objective of this study was to investigate the adhesion, proliferation and mineralization of osteoblasts on arginine-glycine-aspartic acid (RGD)- and magnesium ion (Mg+)-decorated zirconia coatings. The zirconia coatings were prepared via a plasma spray; RGD and Mg+ were immobilized via a silane-coupling agent and ion implantation, respectively. This study employed scanning electron microscopy (SEM) to observe the surface morphology of RGD- and Mg+-decorated zirconia coatings; surface roughness and wettability were also measured. The initial adhesion of osteoblasts was measured, and cell morphology and focal adhesion were observed. In addition, the expressions of the integrins a1, a2, a5, av, and ß1 were measured using RT-PCR. A cell count was conducted to measure proliferation. The expressions of ALP and OCN were detected based on a western blot analysis, and mineralized nodules were observed to visualize the mineralization of osteoblasts. A nanoscale surface structure could be found on the Mg+-decorated zirconia coating, and the RGD-decorated zirconia coating showed better wettability (p < 0.05). Cells on the RGD- and Mg+-decorated zirconia coating possessed better spreading properties than did cells on nondecorated surfaces, and more focal adhesion was observed. The higher expressions of the integrins a5, av and ß1 were found on the RGD-decorated zirconia coating (p < 0.05). The western blot results demonstrated that the introduction of Mg+ heightened the expressions of ALP and OCN. More and bigger mineralized nodules were observed on the Mg+- and RGD-decorated zirconia coating, which consisted of small mineralized nodules. RGD- and Mg+-functionalized zirconia coating facilitates the osteogenic reaction of osteoblasts. RGD improves the adhesion of osteoblasts, and Mg+ benefits the mineralization of osteoblasts. In addition, a synergistic effect was found between RGD and Mg+, allowing better performances with regard to adhesion, proliferation and mineralization when the two were used together rather than as separate decorations.

Cobalt(III)-Catalyzed Oxidative Annulation of Benzaldehydes with Internal Alkynes via C-H Functionalization in Poly(ethylene glycol).

A novel Co(III)-catalyzed oxidative annulation of aromatic aldehydes with internal alkynes for accessing isocoumarins is described, which is achieved by oxidation, weak chelation-assisted C-H bond functionalization, and annulation cascades with excellent functional group compatibility, high atom economy, and step efficiency. By using environmentally benign and inexpensive poly(ethylene glycol)-400 (PEG-400), the Co/Cu/PEG-400 system could be recycled and reused.